PRO ONE EP-1 SYTHETIC GREASE 14oz TUBE (47014)
INDUSTRIAL SYNTHETIC GREASE
Extreme Pressure Performance
from -60°F to 650°F!
THE MOST POWERFUL GREASE ON THE MARKET
HEAVY DUTY full synthetic NLGI 1 grade industrial grease is ASTM
TESTED and designed for extreme temperature conditions or where
low and high speed bearings share the same lubricant.
Delivers increased parts life, reduced downtime and outstanding
protection in the harshest EP, temperature or corrosive environments.
TYPICAL PROPERTIES
NLGI Grade 1
Color Tan
Thickener Calcium Complex
Operating temperature range -60°F to 650°F
Kinematic viscosity of base oils @40°C (ASTM 445) 68 cSt (220 SUS)
Penetration @ 25°C (77°F) (ASTM D-217), mm/10
Worked 60 strokes 310-340
Mechanical Stability (ASTM D-217) % change from P60
P100,000 strokes 2.3%
P10,000 strokes with 50% H2O <2.0%
Dropping Point (ASTM D-2265) °F (°C) +554 (290°C)
Shell Roll Stability (ASTM D-1831) <4.0%
Oxidation Stability (ASTM D-942) psi drop/500 hours 6.0 lbs
Oxidation Bearing Life (ASTM D-3527) 200 hours
4-Ball Wear Test (ASTM D-2266)
mm scar, 40kg, 1200 RPM, 75oF, 1hr 0.42mm
4-Ball EP test (ASTM D-2596)
LWI, kg >75
Weld Load, kgf 500
Timken OK Load (ASTM D-2509) lbs/kg 60/27
Rust test (ASTM D 1743) Pass
Copper Corrosion test (ASTM D-130) Pass/1b
Salt Fog Spray (ASTM B-117) hours to failure 1000 hours
Water Washout (ASTM D-1264) @ 80°C, % loss <2.2%
Base Oil Characteristics
Viscosity SUS @ 100°F 220
Viscosity SUS @ 210°F 62.4
V.I. Min 136
ADVANTAGES:
• Pumpable
• Operates from -60 °F to 650°F
• Extreme pressure protection
• Heavy load carrying ability
• Excellent shear stability
• Displaces water & moisture
• Highly resistant to water wash
• Excellent corrosion resistance
• Reduces downtime
• Reduces power consumption
• Cling capability
APPROVED BY FORD - TOX# 186019
INDUSTRIAL SYNTHETIC GREASE
Extreme Pressure Performance
from -60°F to 650°F!
THE MOST POWERFUL GREASE ON THE MARKET
HEAVY DUTY full synthetic NLGI 1 grade industrial grease is ASTM
TESTED and designed for extreme temperature conditions or where
low and high speed bearings share the same lubricant.
Delivers increased parts life, reduced downtime and outstanding
protection in the harshest EP, temperature or corrosive environments.
TYPICAL PROPERTIES
NLGI Grade 1
Color Tan
Thickener Calcium Complex
Operating temperature range -60°F to 650°F
Kinematic viscosity of base oils @40°C (ASTM 445) 68 cSt (220 SUS)
Penetration @ 25°C (77°F) (ASTM D-217), mm/10
Worked 60 strokes 310-340
Mechanical Stability (ASTM D-217) % change from P60
P100,000 strokes 2.3%
P10,000 strokes with 50% H2O <2.0%
Dropping Point (ASTM D-2265) °F (°C) +554 (290°C)
Shell Roll Stability (ASTM D-1831) <4.0%
Oxidation Stability (ASTM D-942) psi drop/500 hours 6.0 lbs
Oxidation Bearing Life (ASTM D-3527) 200 hours
4-Ball Wear Test (ASTM D-2266)
mm scar, 40kg, 1200 RPM, 75oF, 1hr 0.42mm
4-Ball EP test (ASTM D-2596)
LWI, kg >75
Weld Load, kgf 500
Timken OK Load (ASTM D-2509) lbs/kg 60/27
Rust test (ASTM D 1743) Pass
Copper Corrosion test (ASTM D-130) Pass/1b
Salt Fog Spray (ASTM B-117) hours to failure 1000 hours
Water Washout (ASTM D-1264) @ 80°C, % loss <2.2%
Base Oil Characteristics
Viscosity SUS @ 100°F 220
Viscosity SUS @ 210°F 62.4
V.I. Min 136
ADVANTAGES:
• Pumpable
• Operates from -60 °F to 650°F
• Extreme pressure protection
• Heavy load carrying ability
• Excellent shear stability
• Displaces water & moisture
• Highly resistant to water wash
• Excellent corrosion resistance
• Reduces downtime
• Reduces power consumption
• Cling capability
APPROVED BY FORD - TOX# 186019
INDUSTRIAL SYNTHETIC GREASE
Extreme Pressure Performance
from -60°F to 650°F!
THE MOST POWERFUL GREASE ON THE MARKET
HEAVY DUTY full synthetic NLGI 1 grade industrial grease is ASTM
TESTED and designed for extreme temperature conditions or where
low and high speed bearings share the same lubricant.
Delivers increased parts life, reduced downtime and outstanding
protection in the harshest EP, temperature or corrosive environments.
TYPICAL PROPERTIES
NLGI Grade 1
Color Tan
Thickener Calcium Complex
Operating temperature range -60°F to 650°F
Kinematic viscosity of base oils @40°C (ASTM 445) 68 cSt (220 SUS)
Penetration @ 25°C (77°F) (ASTM D-217), mm/10
Worked 60 strokes 310-340
Mechanical Stability (ASTM D-217) % change from P60
P100,000 strokes 2.3%
P10,000 strokes with 50% H2O <2.0%
Dropping Point (ASTM D-2265) °F (°C) +554 (290°C)
Shell Roll Stability (ASTM D-1831) <4.0%
Oxidation Stability (ASTM D-942) psi drop/500 hours 6.0 lbs
Oxidation Bearing Life (ASTM D-3527) 200 hours
4-Ball Wear Test (ASTM D-2266)
mm scar, 40kg, 1200 RPM, 75oF, 1hr 0.42mm
4-Ball EP test (ASTM D-2596)
LWI, kg >75
Weld Load, kgf 500
Timken OK Load (ASTM D-2509) lbs/kg 60/27
Rust test (ASTM D 1743) Pass
Copper Corrosion test (ASTM D-130) Pass/1b
Salt Fog Spray (ASTM B-117) hours to failure 1000 hours
Water Washout (ASTM D-1264) @ 80°C, % loss <2.2%
Base Oil Characteristics
Viscosity SUS @ 100°F 220
Viscosity SUS @ 210°F 62.4
V.I. Min 136
ADVANTAGES:
• Pumpable
• Operates from -60 °F to 650°F
• Extreme pressure protection
• Heavy load carrying ability
• Excellent shear stability
• Displaces water & moisture
• Highly resistant to water wash
• Excellent corrosion resistance
• Reduces downtime
• Reduces power consumption
• Cling capability
APPROVED BY FORD - TOX# 186019
